FANUC A06B-6400-H102 SERVO AMPLIFIER AMPLIFIER 6 AXIS CONTROL B FOR R-30IB
Product information GE A06B-2115-B103 :
CNC TOOLS provides an exchange credit for most defective items. Our exchange program provides you with savings and keep us stocked for the next time you order. A repairable unit will need to be evaluated to approve full exchange credit.
Advantage:
Provides savings to customer
Ongoing availability of automation parts
Reduce waste by recycling defective items
1. When this function is used, high-frequency vibration can occur, depending on the resonance point of the machine system. In this case, stop the use of this function. If high-frequency vibration occur when a high velocity loop gain is set, use the torque command filter.
2 . Instead of fine acceleration/deceleration, linear acceleration/deceleration after interpolation on the CNC can be used. During batch transfer, do not use fine acceleration/deceleration, but use acceleration/deceleration after interpolation on the CNC software side.
3 . For rapid traverse, a time constant of about 40 to 64 ms is required to perform high-speed positioning by fine acceleration/deceleration plus feed-forward. In this case, use the cutting feed/rapid traverse switchable fine acceleration/deceleration function
- SERVO DRIVE
- SERVO AMPLIFIER
- AMPLIFIER 6 AXIS
- CONTROL B FOR R-30IB
- ROBOT
Notes:
1 This circuit breaker is intended to protect the power cord and related equipment. A circuit breaker to protect a servo amplifier unit is provided within the servo amplifier unit.
2 This AC line filter should always be used,so influence by harmonic noise to the power supply can be reduced. When the line voltage is out of specification,and a power transformer (isolation type) is used, the AC line filter can be omitted. If the AC line filter is ineffective in making the servo amplifier unit satisfy EMC standards, use an appropriate commercial noise filter.
3 The magnetic contactor is required if it is necessary to qualify for European CE marking.
4 When using the SVU,install a surge absorber between the power lines and between a power line and a ground line at the entrance of the power magnetic cabinet in order to protect the equipment from a surge voltage. For the SVUC, it is unnecessary to install an external surge absorber because the SVUC has a built- in surge absorber as the C series amplifier
SVU2-12/12 A06B-6089-H201 A20B-2002-0060 A20B-2002-0032 SVU2-12/20 A06B-6089-H202 A20B-2002-0061 SVU2-20/20 A06B-6089-H203 A20B-2002-0062 SVU2-12/40 A06B-6089-H204 A20B-2002-0063 SVU2-20/40 A06B-6089-H205 A20B-2002-0064 SVU2-40/40 A06B-6089-H206 A20B-2002-0065 SVU2-40/80 A06B-6089-H207 A20B-2002-0066 SVU2-80/80 A06B-6089-H208 A20B-2002-0067 SVU2-12/80 A06B-6089-H209 A20B-2002-0068 SVU2-20/80 A06B-6089-H210 A20B-2002-0069
Another module:
| IC694MDL230 | 120 VAC Isolated Input (8 Points) |
| IC694MDL231 | 240 VAC Isolated Input (8 Points) |
| IC694MDL240 | 120 VAC Input (16 Points) |
| IC694MDL241 | 24 VAC/VDC Input (16 Points) |
| IC694MDL250 | 120 VAC Isolated Input (16 Points) |
| IC694MDL260 | 120 VAC Input (32 Points)** |
| IC694MDL632 | 125 VDC Input (8 Points) |
| IC694MDL634 | 24 VDC Input, Neg/Pos Logic (8 Points) |
| IC694MDL645 | 24 VDC Input, Neg/Pos Logic (16 Points) |
| IC694MDL646 | 24 VDC Input, Neg/Pos Logic, 1 msec Filter (16 Points) |
| IC694MDL654 | 5/12 VDC (TTL) Input, Neg/Pos Logic, (32 Points) |
| IC694MDL655 | 24 VDC Input, Neg/Pos Logic, 1 ms, (32 Points) |
| IC694MDL660 | 24 VDC Input (32 Points)** |
| IC694ACC300 | Input Simulator Module (8 Points) |
Our brand:
Order Process:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
3, We can according to your shipment to ship out the goods, Or we also can help you to ship out the goods directly. And the tracking number will send you by the next day.
4., Usually for our inventory goods only need to take about 3-5 days.
5. If you also have any questions, you can ask me any time, right below is my contact.
FAQ
* Q: Do you provide a warranty for the goods? A: Yes, we provide a warranty for all the goods from us.
* Q: Could Wisdomlong provide technology support?
A: We're in this field for more than 8 years. If there's any problem, please contact with us, we'll provide a suggestion from our
engineer to help you solve the problem.
* Q: Does Wisdomlong keep goods in stock or only trading?
A: We have a large warehouse for goods. Keep lots of goods in the warehouse, so could promise a fast delivery.
* Q: What is your MOQ?
A: We provide you small MOQ for each item, it depends on your specific order!
* Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
* Q: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers benefit ;
We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Send your Inquiry details in the Below, Scan "The QR Code" Now!
|
|
FANUC A06B-6400-H102 SERVO AMPLIFIER AMPLIFIER 6 AXIS CONTROL B FOR R-30IB Images
|
